But if left uncleaned, the vacuum’s exhaust air will start to have a noticeable odour.
When the brush roll is functioning correctly, the indicator light will show a solid green.This means that the vacuum hasn’t detected any issues and that the brush is turning correctly..
Solid Red Light: There is a Blockage.A solid red light usually means that there is a blockage within the floorhead that’s preventing the brush roll from turning freely.. Switch off the vacuum and unplug it from the mains supply.Then tilt the vacuum back and look for a blockage or tangle in the floorhead..
If the vacuum has string or hair tangled around the brush roll, you can usually cut this away with scissors.Larger blockages at the air inlet may require you to remove the baseplate – check your manual for how to do this.. Make sure that the floorhead is properly reassembled before using it, as this can be another source of errors..
A red light may also be caused by a broken vacuum cleaner belt.
The belt drives the brush roll, so a broken belt will prevent it from turning.Once you’ve donated everything, you can and trashed the rest, the real work can start.
You probably haven’t washed your windows in too long, so start on those..Potential home buyers will look at your windows, possibly opening them up and seeing how good the seals are.
You’ll also want to give your bathrooms a real good clean, including scouring your shower/bath.. Make sure there’s no mould anywhere while you’re at it, using some bleach/water mixture if necessary.If you’ve got carpets in the house, clean them thoroughly.